Wissenschaftliche Kurzinfos (Abstracts) zur digitalen Zahnersatzfertigung auf Implantaten:


Donnerstag, 16. November 2017

Azarbal A, Azarbal M, Engelmeier RL, Kunkel TC.
Marginal Fit Comparison of CAD/CAM Crowns Milled from Two Different Materials.
J Prosthodont. 2017 Nov 16. [Epub ahead of print]

Samstag, 14. Oktober 2017

Lalande D, Hodd JA, Brousseau JS, Ramos V, Dunham D, Rueggeberg F.
Marginal discrepancy dimensions of single unit metal crowns fabricated by using CAD-CAM-milled acrylate resin polymer blocks or a conventional waxing technique.
J Prosthet Dent. 2017 Oct 14. [Epub ahead of print]

Freitag, 06. Oktober 2017

Spies BC, Pieralli S, Vach K, Kohal RJ.
CAD/CAM-fabricated ceramic implant-supported single crowns made from lithium disilicate: Final results of a 5-year prospective cohort study.
Clin Implant Dent Relat Res. 2017 Oct;19(5):876-883.

Mittwoch, 27. September 2017

Papadiochou S, Pissiotis AL.
Marginal adaptation and CAD-CAM technology: A systematic review of restorative material and fabrication techniques.
J Prosthet Dent. 2017 Sep 27. pii: S0022-3913(17)30488-2. [Epub ahead of print]

Dienstag, 19. September 2017

Joda T, Zarone F, Ferrari M.
The complete digital workflow in fixed prosthodontics:
a systematic review.
BMC Oral Health. 2017 Sep 19;17(1):124.

Donnerstag, 10. August 2017

Mai HN, Lee KB, Lee DH.
Fit of interim crowns fabricated using photopolymerjetting 3D printing.
J Prosthet Dent. 2017 Aug;118(2):208-215.

Mittwoch, 09. August 2017

Lee WS, Lee DH, Lee KB.
Evaluation of internal fit of interim crown fabricated with CAD/ CAM milling and 3D printing system.
J Adv Prosthodont. 2017 Aug;9(4):265-270.

Mittwoch, 09. August 2017

Papaspyridakos P, Kang K, DeFuria C, Amin S, Kudara Y, Weber HP.
Digital workflow in full-arch implant rehabilitation with segmented minimally veneered monolithic zirconia fixed dental prostheses: 2-year clinical follow-up.
J Esthet Restor Dent. 2017 Aug 9. [Epub ahead of print]

Samstag, 15. Juli 2017

Al-Meraikhi H, Yilmaz B, McGlumphy E, Brantley W, Johnston WM.
In vitro fit of CAD-CAM complete arch screw-retained titanium and zirconia implant prostheses fabricated on 4 implants.
J Prosthet Dent. 2017 Jul 15. [Epub ahead of print]

Donnerstag, 06. Juli 2017

Sailer I, Benic GI, Fehmer V, Hämmerle CHF, Mühlemann S.
Randomized controlled within-subject evaluation of digital and conventional workflows for the fabrication of lithium disilicate single crowns. Part II: CAD-CAM versus conventional laboratory procedures.
J Prosthet Dent. 2017 Jul;118(1):43-48.